Top Entry Heavy Duty Industrial Fluid Mixers & Agitators

TERA Top Entry heavy duty industrial fluid mixers and agitators provide a cost effective solution for a wide range of mixing / agitating applications, motor power mixer shaft speed and impeller configuration are individually selected for optimum performance.

Features include:

• Low headroom compact robust design
• Standard metric motors
• Power range from 0.25 to 15 k W
• Hollow shaft gearbox ensures accurate mixer shaft alignment
• Minimum service factor SF=1.50, for trouble free operation
• Ground gears for efficiency and low noise
• Open tank plate mounted and closed tank models available.

Mixer Greardrive

TERA Mixer drives are designed on a very rigid structure enabling high bending loads, the mixer output shaft is supported by taper roller bearings or deep groove ball bearings on the smaller sizes drives. Gears are case hardened and ground for efficiency, low noise and maximum service life.



Mixer shaft design
The mixer shaft is designed to operate below first critical speed and at all frequencies up to 50 hz if an inverter is used with the drive.

Impellers
Impellers are selected by our application engineers to meet your process requirements

Mixer selection
TERA - Top entry heavy duty industrial fluid mixers and agitators are sized and selected to meet customer process requirements, a range of standard motor powers, mixer output speeds and impeller configurations are available to ensures optimum performance.

Model range
Ten mixer drives are available covering a power range from 0.25kw to 15 kw. Suitable for tanks and vessels from 25 to 60,000 litres.

Model	Mounting A	B	C	D	E	F	APPROX. MASS LESS MOTOR
28- TERA	200	170	6	210	100	115	12KG
40- TERA	250	220	6	225	125	150	12.5KG
50- TERA	250	220	6	280	125	170	14KG
63- TERA	300	270	8	295	150	210	16KG
70- TERA	300	270	8	300	150	210	18KG
85- TERA	300	270	8	370	150	210	29KG
110- TERA	350	310	10	400	175	285	38KG
130- TERA	400	360	10	465	200	285	48KG
150- TERA	450	410	10	540	225	310	77KG
180- TERA	500	460	12	585	250	350	130KG
All dimensions in millimetres

EM - Parallel shaft double or triple reduction geardrives

EM - Top entry industrial fluid mixers and agitator with Double or Triple reduction parallel shaft helical gear drives, output speeds from 2 rpm - 1000 rpm , gears are case hardened and ground for efficiency and quietness under load.

Industries
General chemical, Food and beverages, Breweries, Industrial effluent treatment,

Mixer selection